The NorthStar Asphalt Sealcoating Skid Sprayer is a heavy duty sealcoat application system that mounts or slides into a standard trailer or truck bed. The machine applies sealcoat material to driveways and parking lots and which adds layer of protection against water (by sealing cracks), UV rays, oxidation and chemical spills (oil, gasoline, etc.) The second big feature of sealcoating is the cosmetic improvement to the lot. Sealcoated lots look new and are a good reflection on the building owner. Sealcoaters can earn from .15 – .25 cents per square foot and many lots are thousands of square feet in size.
Banjo cast iron pump sprays out sealcoat and agitates to keep sealcoat mixed inside tank
Built-in hose and gun locks for added safety
Three different nozzles to fine tune the application rate
Large manhole with an inner and outer cover allows for quick fills and prevents spills
For additional information on parking lot sealcoating and striping CLICK HERE.
The NorthStar Asphalt Sealcoating Skid Sprayer applies sealcoat material to driveways and parking lots using a pump spray system. Sealcoat adds a layer of protection from water, UV, chemical, oil and gasoline damage by sealing the surface. The second benefit of sealcoating is the cosmetic improvement. Sealcoated lots look brand new again and give customers a good impression of the business. This package includes 3500-lb. capacity trailer package. U.S.A. The system agitates using the pump system.
Trailer includes 2in. coupler, D.O.T.-approved light kit, safety chains, heavy-duty tongue jack and ST20575R15 tires
Sprayer features a Honda GX160 OHV engine with low oil shutdown and an industrial-grade cast iron pump
These little sealcoaters are very popular machines and are used all over the country to sealcoat driveways and parking lots. They do the job and are very inexpensive which allows almost anyone to get into the lucrative business of sealcoating.
The Asphalt Kingdom AK2200-B 55 gallon drum system is a simple machine that utilizes a 55 gallon drum for material storage and a basic gasoline engine powered pump for pressure and agitation. The only difference between the model B and the AK2200 Model T is the capacity of the tank and the material the tank is made from. This compact 55 gallon drum unit is sufficient to sealcoat about 5500 square feet of parking lot or driveway whereas the larger model T will sealcoat about 27,500 square feet. The main advantage of the smaller machine is portability and a slightly lower purchase price. Also, some people prefer the toughness of a 55 gallon drum. In any event, due to the flexibility of these systems you would always have the option of upgrading to either a larger tank multiple 55 gallon drums.
The AK2200-B machine comes with the 55 gallon drum, the gasoline engine driven pump and spray wand. One question people ask is whether the machine will pump sand. The AK2200 machines will pump and spray sand. Keep in mind that with this and all machines, pumping sand will shorten the impeller life. However, parts can be easily replaced and having sand mixed in with the sealcoat is an important way to increase safety and reduce your liability since sand keeps people from slipping in wet parking lots.
If you have a small pickup the smaller 55 gallon unit may be all you need. If you need more sealcoat here is what you can do. Lets say you go to a job and you have two 55 gallon drums full of sealcoat. You finish that job and get another down the street and are getting low on sealcoat. Since you have two drums your helper could take the spare and get it filled while you continue sealcoating with the last drum. As you can see from the picture changing drums is just a matter of changing the lid.
If you have a larger truck and trailer and portability is not an issue and you expect to sealcoat larger parking lots then I would recommend the AK2200-T model.
The 55 gallon AK2200-B runs about $1,550 and is often advertised at Asphalt Kingdom with free shipping. If you cannot find material locally, Asphalt Kingdom also sells the sealcoat. Asphalt Kingdom has a good reputation and prompt service. They have a broad variety of very reasonably priced equipment and can help you get into the business on a budget. The equipment is simple and rugged. This is key when it comes to keeping your equipment up because downtime means no sales.
Sealcoating is a great business that is normally combined with parking lot striping for obvious reasons. Sealcoat gives new life to old parking lots and can extend a parking lots life quite a bit.
Neal Manufacturing has been a leader in this industry for over 30 years. They manufacture a variety of tough, versatile sealcoating systems. They produce both the spray systems that use a wand and the ride on spray/squeegee systems that distribute sealcoat using a spray bar and squeegee. Neal Manufacturing systems are made using the highest quality and longest lasting components available. They are more expensive but will also outlast most other rigs. They also use components that are easy to service. When maintenance is necessary it is quick and easy. Neal Manufacturing’s goal is to create high production, quality sealcoat machines that stay on the job and not in the repair shop.
The Neal Manufacturing ESSP 550 or 750 Sealcoating Spray Rigs include either a 550 gallon or 750 gallon tank with a high powered wand based spray system. The machines spray sealcoat along with sand. This is important for safety and liability reasons. Sand in the mix prevents lots from becoming slippery when wet. The tank and sprayer come mouned on a tough dual axle open trailer for safe transport to and from the job site. The highly maneuverable trailer spray rigs are ideal for companies who seal driveways or medium sized parking lots. The optional distributor bar and second hand wand transform the ESSP systems into ultra high volume sealcoating machines for enhanced efficiency and higher production.
ESSP 550 and 750 Trailer and Sealcoating Machine Features